Sirius Satellite Radio SPR2C - Manual (Page 33)

Sportster Replay SPR2C Radio Receiver User Guide
33
Audio Level
The audio output of the Sirius Sportster Replay
Receiver can be adjusted to fine-tune the audio
signal level for maximum performance. This is
important when using either the optional Home
Docking Station or the optional Car Docking
Station. The following setting affects both the line
output and FM output levels. To change the Audio
Level, perform the following procedure while in
the “Menu Options” List mode:
1. Use the Rotary Knob to highlight the “Audio Level
Options”. Press the Rotary Knob to select.
2. Use the Rotary Knob to adjust to the desired audio
output level. A 10 segment horizontal bar graph is
displayed with a “-” sign to the left and a “+” sign to
the right. To store your setting and exit this function,
press the Rotary Knob.
Antenna Aiming
When using the optional Home Docking Station or
the Boombox indoors, it is important to locate the
antenna in an acceptable location (See the individual
installation guides for more information).
1. Use the Rotary Knob to highlight “Antenna Aiming”.
Press the Rotary Knob to select.
2. Two 10 segment horizontal bar graphs will be
displayed ( SAT and TER) with a “-“ sign to the left
and a “+” sign to the right. SAT indicated satellite
signal and TER indicates terrestrial signal – if
available.
3. Adjust the antenna for maximum performance as per
the manuals.
To exit this function, press the Rotary Knob or MENU
button.