Sony PAL NTSC 4.43 SLV-SE80UX - Manual (Page 71)

71 Editing
5
Press AUDIO DUB.
The programme position changes “L2,” and the indicator appears in
the display window.
6
To start editing, press the P PAUSE buttons on this VCR and the stereo
system (or other VCR) at the same time.
When the counter reaches “0H00M00S,” audio dubbing stops
automatically.
To stop while editing
Press p STOP on this VCR and the stereo system (or other VCR).
Note
• After you use this feature, the audio in playback mode is automatically set to
monaural.
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the OPTIONS-1 menu (page 66). Use this feature
to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function.
Remember to reset AUDIO MIX to OFF after playing the tape.