Starter diagnostics – ScyTek Electronics GALAXY G40RS User Manual

Page 10

Text mode
Original mode

G 40RS - Page 9

2-Pin Blue Connector: Valet switch port. Mount switch where it is accessible from the driver’s position.
2-Pin Red Connector: LED port. Mount LED where it may be easily seen from either side of the vehicle.
3-Pin White Door Lock Connector: Door lock port.

· BLUE WIRE - negative unlock output (-) 500mA.

· RED WIRE - (+) 100mA trigger output for optional plug-in door lock relay module,

· GREEN WIRE - negative lock output (-) 500mA.

5-Pin White Flat Connector: Antenna connector port.

Starter Diagnostics

Starter doesn’t start and Parking Lights flash:

3 Times - Hood Trigger is active

4 Times - Brake Lights stay On

5 Times - Unit is in Valet (service) mode, and start is disabled.