Shindaiwa X7502863000 - Manual (Page 11)

11
Maintenance and Adjustments
IMPORTANT!
Maintenance, replacement or repair of emission control devices and systems may be performed by any repair establishment
or individual; however, warranty repairs must be performed by a dealer or service center authorized by Echo, Inc The use of
parts that are not equivalent in performance and durability to authorized parts may impair the effectiveness of the emission
control system and may have a bearing on the outcome of a warranty claim.
WARNING!
Accidental start-ups can cause
severe injury! Before performing any
maintenance on this equipment, stop
the engine and disconnect the spark
plug!
Clean de-
bris from
tank and
muffler
Inspect
cooling fins,
and clean as
required
Clean around
spark plug
Inspect/clean
air filter
element
Check cutters and
guide bar for damage
and that bolts
are tight
Lubricate
cutters
Daily Maintenance/Inspection
Figure 12 Inspect front and rear handles for
damaged or loose attachments
Remove all grass clippings and dirt from the hedge trimmer. 1.
Remove any compacted debris from around the fuel tank and/or muffler.
■
■
Inspect the engine cooling fins for clogging, and clean as necessary.
Clean under the cylinder cover and around the spark plug.
■
Inspect the air filter element for clogging, clean as necessary.
■
Check for loose, damaged, or missing components, and repair as necessary. 2.
Lubricate the cutters with oil before use, and after refueling. 3.
Check the cutters for damage and make sure all bolts are tight. 4.
WARNING!
To reduce fire hazard, keep the engine and muffler free of debris, leaves, or
excessive grease.
Keep cooling air
intake passages
clean
(Fuel tank
removed for
clarity)
Figure 13
Keep cooling
fins clean