Standard Horizon HX270S - Manual (Page 26)

HX270S Page 24
5.16 SETUP MODE
The HX270S’s Setup Mode allows a number of the HX270S operating pa-
rameters to be custom-configured for your operating requirements.
The Setup Mode is easy to activate and set, using the following procedure:
1. Turn the radio off.
2. Hold down the SQL key, then turn on the transceiver while still holding
down the SQL key.
3. “SEt” will appear on the display, indicating that the Setup Mode has been
activated.
4. Press the SQL key to select the Menu item to be adjusted (see below).
5. Press the [
] or [ ] key select the status or value of the Menu item.
6. After completing your adjustment, press the SQL key to save the new
setting, and then press the PTT switch to exit to normal operation.
Key Beep
DW Display
Lamp Mode
Scan Lamp
Scan Display
➠
➠
➠
➠
➠
➠
➡
“SQL” Key