Sharp AR-164 - Manual (Page 32)

30
SPECIAL FEATURES
B/W REVERSE
The B/W REVERSE feature is used to reverse black and white areas.
● When the B/W REVERSE feature is selected, the exposure mode will be
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is canceled, the MANUAL mode will not automatically
be canceled.
1 Place the original in the document feeder tray or on the
original table.
2 Press the B/W REVERSE key.
3 Check the copy paper size.
● If an optional paper feed unit is installed:
When copying from the original table, use the ORIGINAL SIZE
ENTER key to select the original size. Copy paper of the same size as
the original will be automatically selected. If desired, another paper
tray can be selected by pressing the TRAY SELECT key.
4 Make all other desired copier selections and press the
START key.
B/W reverse
Original Copy