Troubleshooting – Sega Zombie Revenge User Manual
Page 32
29
11. TROUBLESHOOTING
PROBLEMS
CAUSE
COUNTERMEASURES
With Main SW
Power is not supplied.
Plug in correctly
ON, no activation
Power supply/voltage is not correct.
Make sure that power supply/voltage is
correct
Irregular sound
Greasing to gear mesh portion is not
Apply greasing or eliminate extraneous
emitted from
satisfactory, or extraneous matter
matter.
inside Cabinet
mixed in.
The color of the
Connector connections are defective.
Check the connection for the RGB and
image on PROJ.
SYNC connectors of the PROJ. TERM.
screen is incorrect.
BD and VPM BUFFER BD.
The image on PROJ.
Affected by the magnetic field of
Make CONVERGENCE adjustment.
screen has color
installation location.
(Refer to Section 12.)
deviation.
No sound is emitted.
Sound Volume adjustment is not
Adjust sound volume. (see Section 7).
appropriate.
Sound BD and speaker are
Perform sound test to find and replace
malfunctioning.
defective parts.(Refer to Section 7).
*NETWORK check
Communication cable’s connection
Perform V.R. setting, Adjustment.
will not finish.
failure.
*Communication play
Communication cable’s connection
Check for Communication cable
is not possible.
failure.
disconnection
Communication Play setting is wrong.
Correctly set in test mode.
Should trouble occur, first check connector connections.