Smeg STA6047 - Manual (Page 6)

TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program BIO/ECO
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting 5 /6
1.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.
"3 /1" OPTION BUTTON
Pressing this button ( 6) activates the "3/1" option; the relative light
comes on to confirm the selection.
This option is specifically for the use of tablet or powder detergents
which already contain salt and rinse aid. If you decide to use a product of
this kind, press the button to allow the dishwasher to vary the necessary
parameters to ensure the best washing results by making full use of the
quantities of detergent, salt and rinse aid these special products contain.
At the end of the cycle, the appliance automatically presets for the use of
conventional products.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
17
User instructions