SoundCraft CPS275 - Manual (Page 11)

formed if this chassis and the power supply chassis are in electrical contact through
the fixing rails they share in the rack. To avoid this situation, standard isolating
washers may be employed when fixing the power supply (or supplies) or any other
unit into the rack.
W A R N I N G : THIS APPARATUS MUST BE
EARTHED. Under no circumstances should the
mains earth be disconnected from the
CPS250/CPS275 power supply unit.
GENERAL
As with all electrical/electronic equipment care should be taken when handling this
unit. Avoid general mishandling and do not drop. Avoid storage and operation in
dusty locations and do not expose to corrosive atmospheres.
To avoid risk of fire do not expose this unit to rain
or moisture.
Retain all packaging for transportation in the event of the unit requiring servicing.
Retain this manual safely, along with all other relevant documents.
For touring/mobile transportation it is advisable to install the CPS250/CPS275 in a
flight case to provide mechanical protection. Refer to your Soundcraft dealer for a
suitable case.
Where the CPS250/CPS275 is enclosed in a touring case, provision must be made for
adequate ventilation to the rear of the unit to ensure unrestricted supply of air for the
cooling fan.
Use only the high-current mains lead supplied, not
the more common 5A type supplied with other
equipment.
Installation 7