Sunfire Symphonic Reference High Fidelity Control Center and Preamplifier - Manual (Page 14)

User's Manual
14
APPENDIX
SpeciÞ cations
© 2002 SunÞ re Corporation.
All rights reserved. SunÞ re Corpora-
tion re serves the right to improve
its products at any time. Therefore,
speciÞ cations are subject to change
without notice.
Manual part number:
913-046-00 Rev A
Line input to Main output
Line Gain: 17.7 dB +/- 0.5 dB
Max level out: 7.2 Vrms at 1 KHz
Max level in: 10 Vrms at 1 KHz
Separation: > 70 dB at 1 KHz
> 50 dB at 10 KHz
Frequency Response:
20-20 KHz +/- 0.2 dB
THD:(2 V out) <0.005% 20-20 KHz
S/N (2 V out, A-weighted):
>100 dB
Crosstalk between inputs:
> 100 dB
(2 V in, 1 KHz)
Mute: > 50 dB
Phono section
Phono Gain:
MM = 41 dB +/- 1 dB
MC = 65 dB +/- 1 dB
Phono Noise:
MM > 82 dB
MC > 71 dB
Phono Input Impedance
MM 47K ohms
MC 240 ohms
Tone Controls
Tone Response 100 Hz, 10 KHz
Bass Boost +13.5 dB +/- 1 dB
Bass Cut -5.2 dB +/- 1 dB
Treble Boost +4.5 dB +/- 1 dB
Treble Cut -3.5 dB +/- 1 dB
High pass section
Freq Response: -3 dB at 80 Hz,
12 dB / octave
Trigger Outputs
12 VDC Trigger, current less than
500 mA total
Infrared ports
Optically Isolated
Standard 1/8” mini jacks
Standard 12 V signal level
Dimensions
17” W x 5.75” H x 16.5” D
Net Weight
16 lbs
AC line operation
Meets the speciÞ cations above from
90-130 VAC 50-60 Hz