Speco Technologies 650Line Intensifier3 Tamperproof Dome w. Chameleon Cover HINT13D7G - Manual (Page 8)

OSD MENU DETAILS
1. PRESET
[INDOOR / OUTDOOR / LOW LIGHT / LOBBY / HALLWAY / ELEVATOR]
Quick & Easy Way to install without complicated OSD menu setting!
** Attention : Select any preset mode and push the set button once,
Blinking status means it is correctly set up at that mode.
8
* * If you need more detailed setting, click ‘ADVANCED’ to see more
OSD menu at every preset mode.
2. INTENSIFIER
[AGC / SHUTTER / INTENSIFY / INITIAL SET / PREVIOUS]
- AGC (Off / Low / Middle / High)
: Adjusts value of AGC gain and increases the GAIN level to
brighten the picture. (noise / distortion may develop)
- SHUTTER
* FLK - Flicker-less mode (FLK) reduces on-screen flickering.
* ESC - Electronic Shutter Control (AUTO) adjusts brightness
level on screen.
- INTENSIFY : Automatically provides a clear image under low-
light conditions. You can control the maximum low-light magnification
from 2x to 512x (increasing magnification may cause noise/distortion).
This function is deactivated when SHUTTER is set to FLK mode.