Sanofi-aventis Lantus SoloSTAR - Manual (Page 5)

4. Hold the pen with the needle pointing
upward.
5. Tap the insulin reservoir to make any air
bubbles rise up toward the needle.
6. Press the injection button all the way in.
Check to see if insulin comes out of the
needle tip. If insulin does not come out,
repeat the test until it does.
If no insulin comes out after doing
the test three times, replace the
needle with a new one and try again.
8
1. Select a dose of 2 units by turning the
dosage knob.
2. Take off the outer needle cap. Keep this for
removing the used needle after your injection.
3. Take off the inner needle cap and throw it away.
Keep Discard
STEP 2
DO A
SAFETY TEST
Always perform the safety test
before every injection. This removes
air bubbles and ensures the pen and
needle are working properly.
7
2
0
4
Please click here or visit:
http://products.sanofi-aventis.us/lantus/lantus.html
for Additional Important Information.