Asus W3A - Manual (Page 20)

20
2
Knowing the Parts
Right Side
Refer to the diagram below to identify the components on this side of the Notebook PC.
Microphone Input Jack (Mic In)
The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals
from audio devices. Use this feature for video conferencing, voice narrations, or simple audio recordings.
Headphone Output Jack (Phone Out)
The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to ampli-
fied speakers or headphones. Using this jack automatically disables the built-in speakers.
PC Card Slot
One PCMCIA 2.1 compliant PC Card socket is available to support one type I/II PC card. The socket
supports 32-bit CardBus. This allows accommodation of Notebook PC expansion options such as memory
cards, ISDN, SCSI, Smart Cards, and wireless network adapters.
Flash Memory Slot
Normally a PCMCIA or USB memory card reader must be purchased separately in order to use memory
cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PC
has a built-in memory card reader that can read the several flash memory cards. More information is
provided in section 4 of this manual.
Infrared Port (Standard Infrared)
The standard infrared (IrDA) communication port allows convenient wireless data communication
with infrared-equipped devices or computers. This allows easy wireless synchronization with PDAs or
mobile phones and even wireless printing. If your office supports IrDA networking, you can have
wireless connection to a network anywhere provided there is a direct line of sight to an IrDA node.
Flash Memory
Slot
DC Power
Input Jack
Mic
Input
Head
Output
USB
Port
Air Vents
1394
Port
PC Card
Slot
PC Card
Eject
Infrared
Port
Power
Switch
TV-Out
Port