Seagate CHEETAH ST373207LW/LC - Manual (Page 81)

Cheetah 10K.7 SCSI Product Manual, Rev. D 71
[1] Closed end type 68-pin connector used. Terminators enabled.
[2] Open end type (in-line application) connector used.
[3] Host need not be on the end of the bus. Another device can be on the end with the terminator, the host
having no terminator.
[4] Total interface cable length must not exceed that specified in ANSI document T10/1302D (including host
adapter/initiator). The cable length restriction limits the total number of devices allowed.
[5] SCSI ID7 has highest arbitration priority, then ID15 to ID8 (ID 8 has the very lowest priority).
[6] Last drive on the bus.
[7] Open-end type 68-pin connector used. If end device, use external terminator and closed-end type 68-pin
connector.
Figure 24. SCSI daisy chain interface cabling for LW drives
LW/LWV
Model
Host
Adapter
PCB
Pin 1
(check your
adapter for Pin 1 location)
[6]
SCSI ID 1
SCSI ID 0
SCSI ID 7 [5]
[1]
[3]
[2]
[2]
2 through X
SCSI devices [4]
Terminator
[7]