User instructions, 2 washing programs – Smeg LSPX1253 User Manual

Page 12

3.2 Washing programs

The dishwasher is equipped with a control panel and an 3-FIGURE
DISPLAY (12), described in chapter "1. Description of the controls", from
which it is possible to carry out all the power switch-on, switch-off and
programming operations.

Before starting a washing program make sure that:
x The water supply tap is open.

x The correct amount of detergent has been added to the

dispenser.

x The baskets have been correctly loaded.

x The spray arms are able to rotate freely and without

obstruction.

x The dishwasher door is securely closed.

PROGRAMMING
In this dishwasher model all the programming operations are possible
only with closed door. With open door, on the 3-FIGURE DISPLAY (12)
will appear the symbols -- and the PILOT LIGHT PROGRAMS (3)
remains out.

SELECTION PROGRAM
Keep pressing the PROGRAM SELECTION button (2) until the indicator
light corresponding (3) to the desired program illuminates.

User instructions