Time mode, En gl is h, En gli sh – Seiko 7T84 User Manual

Page 5: Lhow to set the time (main watch and small watch), Bcrown crown crown b

gli

TIME MODE

Time setting procedures include hand settings of the main watch and small

watch to the current time.

The hands should be correctly aligned to the 0 position (initial position)

before starting to set the time. If they are not correctly aligned to the 0

position, it is necessary to correct their alignment before setting the time.

To correct the hand alignment, refer to HAND POSITION ADJUSTMENT.

How to set the time (main watch and small watch)

Pull out to second click when the

small second hand is at the 12 o’clock

position.
The small second hand will stop on

the spot.

Small second hand

Turn to set the time of the main

watch.

* The m o me nt the d ate c h a ng e s is

midnight. When setting the hour hand,

be sure that AM/PM is set correctly.

* While doing so, set the minute hand 4 to

5 minutes ahead of the correct time, and

then slowly move it back to the exact

minute(s).

Press to set the time for the small

watch.
With each press of but ton B the

small watch hands will advance 1

minute. Pressing and holding button

B will advance the small watch hands

rapidly.

MODE SELECT

6 1

TMR CHR A

Upon completion of all set tings,

push back in to normal position

simultaneously with a time signal.

Small watch

Hour hand

Minute hand

MODE SELECT

6 1

TMR CHR A

CROWN

* If the crown is pulled out while the timer

or stopwatch is measuring time, the

measurement will be forcibly terminated

and the timer or the stopwatch will be

reset.

7T84_E.indd 10-11

07.5.25 11:42:28 AM