Sharp AR-C360P - Manual (Page 41)

Sharp AR-C360P User’s Guide
Getting started > 41
> Ethernet – For network cable connection.
NOTE
Interface cables are not supplied with your printer.
Connecting the parallel interface
1. Turn off the printer and the computer.
2. Connect a parallel cable between the printer and computer.
3. Turn on the printer and then the computer.
Connecting the USB interface
Do not connect the USB cable at this time. You will be instructed
when to connect the USB cable when you run the Drivers CD.
If you are connecting your printer directly to a stand alone computer
proceed to the section entitled “Printer Drivers”.
Connecting the network interface
1. Turn off the printer and the computer.