Sony XVM-H65 - Manual (Page 10)

10
ATT POWER
MENU INPUT
MODE
LIST
SETUP
TOP MENU ALBUM +
ALBUM –
MENU
DISPLAY
ENTER
VOL
SUBTITLE AUDIO
OFF
INPUT
POWER
POWER
When NTSC Video is selected
VIDEO1
NTSC
When PAL Video is selected
VIDEO1
PAL
B VIDEO 1 B VIDEO 2 B VIDEO 3*
Operation
Selecting the input source
You can select the input source and colour system.
1
Press (POWER).
The power is turned on.
Tip
If your car has no ACC (accessory) position on the ignition key switch, and the POWER
SELECT switch is set to the B position, the monitor does not turn on by pressing
(POWER) on the card remote commander (page 6).
2
Press (INPUT) to select the desired input source.
Each time you press (INPUT), the indication changes in the following sequence:
* To select the connected Sony DVD player MV-101
Press (INPUT) repeatedly to select “VIDEO 3.”
3
Press
V
or
v
to select PAL or NTSC colour system.
Press either button while the source indication (such as “VIDEO 1”) is displayed.