Seagate BlackArmor NAS 440 - Manual (Page 17)

BlackArmor® NAS User Guide 18
Setup Steps for Administrators
Completing the Initial Setup
The first time you log in to your BlackArmor server, the setup wizard opens. To complete the
setup:
1. Click Next.
2. Read the Seagate BlackArmor license agreement, then click I Agree.
3. Customize your server’s basic settings:
• Enter a name for your BlackArmor server. To make the server easy to identify on your
local network, give it a unique and easy-to-remember name. The name can be up to 15
alphanumeric characters long and can include hyphens. Spaces are not allowed.
• Enter a description for the server, using the location, content, or other feature of the
server that will help you differentiate it from other servers on your local network.
4. Select the time zone that represents the location of your server, then set the current date and
time.
5. Enter and re-enter the new administrator password, then click Next.
Seagate highly recommends customizing the administrator password to protect your
BlackArmor server and its contents. Passwords can be up to 15 alpha-numeric characters long
and are case-sensitive.
Good password example: LEag29ue
Bad password example: blackarmor
6. Select the network mode you want, then click Next.
By default, the BlackArmor server’s network mode is set to DHCP.
Unless you are part of a large corporation with an IT department, Seagate highly recommends
using the DHCP network mode.
7. Click Next to complete the setup.
8. Review the contents of the setup summary. Click Back to make any necessary changes, or
click Finish to complete the setup.