Sony CMD-J26 - Manual (Page 2)

2
Power requirements 3.7 V (nominal)
Operating temperature -10°C to +55°C
Accessories operating temperature ± 0°C to +45°C
Connectors External RF connector
Bottom Connector (12-pin flat I/O connector)
Mini plug head set jack
WAP (CMD-J6 only) Supported protocols by the WAP v.1.1 compliant browser:
Wireless Session Protocol (WSP)
Wireless Caching Model
Wireless Transaction Protocol (WTP)
Wireless Control Message Protocol (WCMP)
Wireless Markup Language (WML)
Wireless Markup Language Script (WMLS)
Wireless Bitmap (WBMP)
Wireless Transport Layer Security (WTLS Class1)
Wireless Telephony Application Interface (WTAI)
Email Supported by the e-mail protocols:
SMTP
POP 3
Supplied accessories AC Adapter
Battery (std.) QN-J6BPS
Optional accessories Battery (extd.) QN-J6BPE
HFK Main Unit QN-3HFK
HFK Cradle QN-J5CH
Cigar Lighter Charger QN-3CC
Data Cable RS QN-3RS
Data Cable USB QN-3USB
Mobile Data Software QN-3DS
Headset QN-3HS
Travel Charger QN-3TC
NOTE
This device contains electrostatically sensitive components. Damage can occur to these components
if the appropriate handling is not adhered to.
ESD Handling precautions:
A working area in which Digital Cellular Telephones may be safely handled without undue risk of
damage from electrostatic discharge must be available.
The area must be equipped as follows:
! All working surfaces must have a dissipative bench mat, safe for use with live equipment,
connected via 1.2M Ω resistor to a common ground point.
! A quick release skin contact device with a flexible cord, which has a built-in safety resistor of
a range between 5.2K Ω and 1.2M Ω shall be used. The flexible cord must be attached to a
dissipative earth point.
! All containers and storage must be of the conductive type.