Sharp MD-S301 - Manual (Page 15)

■ To eliminate the confirmation
sound
(Remote control)
Every time a button is pressed, a “beep”
will be heard in the headphones.
To silence the “beep” sound, do the follow-
ing:
1
While in the stop mode ...
Hold down the PLAY MODE button
until “SET UP” appears.
● When you release the button, “BEEP 1”
will appear.
2
Press the PLAY MODE button.
● “BEEP 0” will appear, and the confirma-
tion sound will disappear.
● To restore the confirmation sound, se-
lect “BEEP 1”.
3
Press the ■ button.
● The normal display will reappear.
■ To turn off the display
backlight
(Remote control)
Whenever you press a button, the display
will light for about 4 seconds, so that you
can read it in the dark. You can turn off the
backlight.
1
While in the stop mode ...
Hold down the PLAY MODE button
until “SET UP” appears.
● When you release the button, “BEEP 1”
or “BEEP 0” will appear.
2
Press the 5 or 4 button until “EL
on” appears.
3
Press the PLAY MODE button.
● “EL off” will appear, and the backlight
will go out.
● To turn the backlight back on, select
“EL on”.
4
Press the ■ button.
● The normal display will reappear.
PLAY MODE
14
MD-S301