Symphonic WF802 - Manual (Page 26)

– 26 – EN
1L25
STARTING FROM A DESIRED
TIME COUNT
1 Press the SEARCH MODE button twice dur-
ing playback or while paused.
2 Press the Number buttons to set the desired
time count.
¡ Example: 1 hour, 23 minutes and
30 seconds
1
→ 2 → 3 → 3 → 0
CD DVD
By using only the
TITLE SEARCH:
1 Directly enter the desired title number with the
Number buttons with playback stopped.
CHAPTER SEARCH:
1 Directly enter the desired chapter number
with the Number buttons when the disc is
being played or paused.
¡ When you finish entering the number, the selected
title or chapter will start automatically.
Notes
¡ Play back from a desired title or chapter is not avail-
able with some DVDs.
¡ If the title being played does not display the chapter
number, that means the chapter search function is
not available with that title.
TIME 1:23:30
TOTAL 1:29:00
Notes
¡ For a DVD, Time Search in Title is effective. (But
Time Search in Chapter is ineffective.)
¡ For a CD, Time Search in Track is effective. (But
Time Search in the entire disc is ineffective.)
¡ Playback from a desired time count is not available
with some discs or if the unit is in stop mode.
¡ If the wrong numbers are entered, press the
CLEAR/C.RESET button and re-enter the correct
numbers.
MARKER
RANDOM (Audio CD)
1 Press the MODE button in stop mode.
¡ The program setting menu screen will appear.
2 Press the MODE button again.
CD
You can define the part to be called back.
1 Press the SEARCH MODE button three
times during playback.
Set the marker
¡ Using the Arrow buttons (s/ B),
position the cursor on to the
marker number shown as “NOT SET”. Press the
ENTER button when the screen to be reviewed
appears. The marked time will be displayed. Up to
5 points can be marked.
Call back the marker
¡ Using the Arrow buttons (s/ B), position the cursor
on to the marker number to be called back and press
the ENTER button.
Clear the marker
¡ Using the Arrow buttons (s/ B), position the cursor
on to the marker number to be cleared and press the
CLEAR/C.RESET button.
To clear all markers, place the cursor on “AC” (All
clear markers) and press the ENTER button.
2 Press the SEARCH MODE button or the
RETURN button to exit the display.
CD DVD
RANDOM
EXIT : MODE START : PLAY
3 Press the PLAY button. Random playback
will then start.
Note
¡ Program playback is not available during random
playback.
TRICKS WITH THE SKIP BUTTONS (H, G)
If the SKIP button G is pressed during playback or
while playback is paused, the current chapter will be
skipped and the next chapter will start. If the SKIP
button H is pressed once, the beginning of the cur-
rent chapter will be located for replay. If the SKIP
button H is pressed again within 2 seconds after
playback begins, the previous chapter will be locat-
ed.
1 2 3 4 5 AC
NOT SET