Silvercrest KH2610 08/2009-V3 - Manual (Page 10)

Setting up and connecting
GB
12 KH 2610
Requirements for the set-up location
For safe and faultless operation of the device the set-up location must
fulfi ll the following provisions:
The device must be placed on a fi rm, fl at and level surface. ■
Do not place the device in a hot, wet or very damp environment or ■
in the vicinity of fl ammable materials.
Place the device so that it is not subjected to direct sunlight. ■
Connecting to a computer
System prerequisites
You will need a computer with a vacant USB port and with the ‹
operating system Windows® XP, Windows® Vista or Windows® 7
from the Microsoft® corporation.
Installation of the drivers and the
ArcSoft PhotoImpression 6 programme
NOTICE
In these operating instructions only the programme sections ►
are described that you will need for scanning your slides
and/or fi lm negatives. You can fi nd further information in the
programme's on-line help.
The illustrations and descriptions refer to the operating system
►
Microsoft® Windows® Vista. The illustration depictions can
diff er, depending on the display settings, with other operating
systems.
IB_KH2610_37970_LB3A.indb 12 26.10.2009 12:35:06 Uhr