SUPER MICRO Computer SUPERSERVER 6015T-INF User Manual
Page 72
7-10
S
UPER
S
ERVER 6015T-T/6015T-INF User's Manual
PCI Confi guration
Access the submenu to make changes to the following settings for PCI devices.
Onboard GLAN1/Onboard GLAN2 (Gigabit- LAN) OPROM Confi gure
Enabling this option provides the capability to boot from GLAN Port 1 or GLAN Port
2. The options are Disabled and Enabled.
Default Primary Video Adapter
This feature allows the user to specify which video adapter is to be used as the
default primary video adapter: the onboard video adapter or others. The options
are Other and Onboard Video.
Emulated IRQ Solutions
The options are Disabled and Enabled.
PCI-Exp. I/O Performance
Some add-on cards perform faster with the coalesce feature, which limits the
payload size to 128 Bytes, while others perform faster with a payload size of 256
bytes, which inhibits coalesce features. Please refer to your add-on card user
guide for the desired setting. The options are Payload (256 Bytes) and Coalesce
Enabled (128 Bytes).
PCI Parity Error Forwarding
The feature allows SERR and PERR errors detected in PCI slots to be sent
(forwarded) to the BIOS DMI Event Log for the user to review. The options are
Enabled and Disabled.
ROM Scan Ordering
This feature allows the user to decide which Option ROM to be activated fi rst. The
options are Onboard fi rst and Add-On fi rst.
Reset Confi guration Data
If set to Yes, this setting clears the Extended System Confi guration Data- (ESCD)
area. The options are Yes and No.