Sharp AR-350 - Manual (Page 81)

5-13
5
10 Remove the paper from the stapler
compiler.
11 Raise the lever at the end of the staple
box.
If the top staple is bent,
be sure to cut it out. If
bent staples remain, a
staple jam may occur.
12 Return the lever to its original position.
13 Insert the staple box.
Push the staple box until
it clicks into place.
14 Unlock the staple unit lever and return
the staple unit to face down.
15 Close the front cover.
NOTE
Execute test printing in the staple sort mode to
ensure that stapling is performed properly.
FINISHER