Woodstock M1104 - Manual (Page 9)

-7-
M1104, M1105, M1106 Heavy-Duty Bench Grinder
SET
UP
Your SHOP FOX ® Bench Grinder has been care-
fully packaged for safe transporting. If you notice the
machine has been damaged, please contact your autho-
rized SHOP FOX ® dealer immediately.
Unpacking
SET UP
NOTICE
If ordering replacement parts, refer to
the parts list and diagram in the back of
the manual.
I
N
Figure 3. Left eye shield assembly.
K
J
E
C
B
A
D
H
G
F
Figure 4. Left tool rest and hardware.
L
Inventory
The following is a description of the main components
shipped with your bench grinder. Lay the components
out and use the list below and Figures 3 & 4 to inven-
tory your package.
A. Left Lens Hanger (Eye Shield) ...........................1
Right Lens Hanger (Eye Shield) (Not Shown) ..........1
B. Toothed Flange Scr M6-1.25 x 13mm (Eye Shield) ...2
C. Lock Washer 7mm (Eye Shield) .........................2
D. Flat Washer 7mm (Eye Shield) ..........................2
E. Female Knob M6-1.25 (Eye Shield) .....................2
F. Hex Bolt M6-1.25 x 10mm (Eye Shield) ................4
G. Flat Washer 7mm (Eye Shield) ..........................4
H. Left Spark Arrestor (Eye Shield) ........................1
Right Spark Arrestor (Eye Shield) .......................1
I. Lens (Eye shield) (Not Shown) ...........................2
J. Nut Plate (Eye Shield) ....................................2
K. Phlp Hd Scr #10-24 x 3 ⁄
8
" (Eye Shield) .................4
L. Left Tool Rest .............................................1
Right Tool Rest (Not Shown) .............................1
M. Flat Washer 8mm (Tool Rest) ...........................4
N. Hex Bolt 5 ⁄
16
"-18 x 3 ⁄
4
" (Tool Rest) ......................4
Heavy-Duty Bench Grinder Unit (Not Shown) .........1
If any parts are missing, examine the packaging for the
missing parts. For any missing parts, find the part num-
ber in the back of this manual and contact Woodstock
International, Inc. at (360) 734-3482 or at tech-
[email protected]
Box Inventory: Qty.
M