Silvercrest SDB 2000 A1 - Manual (Page 6)

- 4 -
The water hardness level can be queried at your
local water works.
• Close the water reservoir filler opening y ,
making sure it "clicks" shut.
Plugging In and Ironing
You can dry iron without steam at all temperatures.
Steam ironing is first possible at level 2 (••), we
however recommend level 3 (•••) should be used for
steam ironing, because at this level the temperature
to generate steam is optimal.
• Plug the power plug into a power socket of
220 - 230 V~/50 Hz.
Water hardness
Ratios - distilled
water to mains
water
very soft / soft 0
medium 1: 1
hard 2: 1
very hard 3: 1
Important!
Should the care instructions for an article of clothing
not mention ironing, (Symbol
), you should not
iron that clothing article. You could otherwise cause
damage to the clothing article.
• Check the care instructions on the labels of the
clothing article whether and at which temperatu-
re the clothing article may be ironed.
• Set the appropriate temperature setting with the
temperature control a .
The control light for the temperature w lights up.
When the control light goes out, the chosen
temperature
w has been reached.
• Wait until the temperature control light w goes
out.
• To moisten the material, press the button for the
water fog o .
This function is suitable for very dry, crumpled or
creased materials.
Steam Ironing
• Set the steam control u to the desired steam
strength setting.
Symbol
Temperature
regulator
a
Type of Material
Acrylic, rayon (viscose)
Silk, wool, polyester
blended fabrics
Cotton, linen, viscose
IB_54335_SDB2000A1_LB6 08.07.2010 9:59 Uhr Seite 4