Senco RoofPro 450 User Manual

Roofpro, Coil roofing nailer, Fastening solutions

Fastening Solutions

RoofPro

™

450

Coil Roofing Nailer

Applications:

Features and Benefits:

Tool Specifications:

Fastener Specifications:

RoofPro 450 Coil Nailer is our Pro Series Roofing Coil Nailer. This

construction grade tool has steel wear plates and has fully adjustable

shingle guide, drive depth and exhaust.

Item #: 3C0001N: Contact Actuation (Dual Action)

3C0002N: Sequential Actuation (Restrictive)

Weight: 5.9 lbs. ( 2.68 kg)

Height: 9.75" (247.6 mm)

Length: 9.75" (247.6 mm)

Nail Capacity: 120

Collation: Conical wound, angled coil wire

Operating Pressure: 70-120 psig (4.8-8.3 bar)

Mode of Operation: Tool is available with either sequential

or contact actuation trigger mechanism.

Hose Fitting: 1 ⁄4 " NPT

Drives 11 gauge (.120") , Full Round Head Nails 3/4" 1-3/4" smooth

shank. Capacity 120.

For asphalt and fiberglass shingle nailing, for both new roofs

and reroofing. Also for attaching waterproof tar paper, metal

drip edges, insulation board.

• Aluminum main housing and cap – more durable than magnesium

for punishing roofing environments

• Tool-free adjustable depth of drive for consistent and controllable

nail set

• Comfort and convenience features include: durable comfort grip, 360

adjustable exhaust (tool required), and adjustable shingle guide

• Steel wearplates reduce shingle abrasion on tool

• Adjustable nail canister accommodates entire range of true

round-head roofing nails.

• Tool includes case, tool oil and wrench

HJ (.120)