Sharp AL-1215 - Manual (Page 17)

15
3
LOADING THE PAPER TRAY
1 Raise the handle of the paper tray
and pull the paper tray out until it
stops.
2 Remove the pressure plate lock. Rotate the pressure plate lock
in the direction of the arrow to remove it while pressing down
the pressure plate of the paper tray.
3 Store the pressure plate lock which has been removed in step
2. To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
4 Adjust the paper guides on the paper tray to the copy paper
width and length. Squeeze the lever of paper guide
and slide
the guide to match with the width of the paper. Move paper
guide
to the appropriate slot as marked on the tray.
Pressure plate lock
A
B
Paper
guide B Paper
guide A
AL-1215_1530-1551CS.book 15 ページ ２００２年８月７日 水曜日 午前９時３４分