Skyworth CTV-21T05N - Manual (Page 11)

OPERATION INSTRUCTIONS
TUNE MENU
You can select the item by press the PROG+/- buttons or the (GREEN) /
(BLUE) buttons, move to the menu you select and then do as follows.
1.COLOUR SYS
Press VOL+/- buttons or (RED) / (YELLOW) buttons to set the colour
system.
2.SOUND SYS
Press VOL+/- buttons or (RED) / (YELLOW) buttons to set the sound
system.
3.BAND
Press VOL+/- buttons or (RED)/ (YELLOW) buttons. You can select the
Band VHF-L.VHF-H or UHF.
VHF-L-----VHF-H-----UHF
4.SKIP
Press VOL+/- buttons or (RED) / (YELLOW) buttons to set skip on or off,
when you set skip on, this program will be hidden.
5.PROGRAM
Press VOL+/- buttons or (RED)/ (YELLOW) buttons to set the PROGRAM
number.
6.FINE TUNE
For better quality with VOL+/- buttons or (RED) / (YELLOW) buttons.
7.SEARCH
Press VOL+/- buttons or (RED) / (YELLOW) buttons to search for next or
previous available program, the set will automatically stop while the signal
is received.
8.AUTO SEARCH
Press VOL+/- buttons or (RED)/ (YELLOW) buttons, the TV set will
automatically search in 3 bands and store every program.
COLOUR SYS
SOUND SYS
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
TUNE
AUTO
M
VHF-L
OFF
2
EXCHANGE MENU In AV mode ,this item will not be displayed.
Select the item by pressing the PROG+/- buttons or the (GREEN)/ (BLUE)
buttons.
1.
Press VOL+/- buttons or (RED) / (YELLOW) buttons to adjust
2.PROGRAM 2
Press VOL+/- buttons or (RED) / (YELLOW) buttons to adjust
PROGRAM 2.
PROGRAM 1
PROGRAM 1.
3.Press VOL+/- buttons or (RED) / (YELLOW) buttons to exchange
PROGRAM 1 and PROGRAM 2.
PROGRAM
PROGRAM
EXCHANGE
EXCHANGE
1
1
*In AV mode, only COLOUR SYS displayed under this menu.
*After fine tune. The colour of program number will change from GREEN
to YELLOW.
-9-