Sanyo PJLINK PLC-ZM5000L - Manual (Page 87)

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot
or lost the number and unable to operate the projector, contact the service center.
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
* Should the four-digit number
be changed, the factory set
number will be invalid.
Put the label below (supplied) on in a prominent
place of the projector’s body while it is locked with
a PIN code.
While the projector is locked with the PIN code...
PIN Code Lock No .
Logo PIN Code Lock No .
Appendix
PIN Code Number Memo
87