Sanyo PJLINK PLC-ZM5000L - Manual (Page 45)

If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among
PAL, SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
When the Video System is 1035i, 1080i or 1080p,
select the system manually.
If the projector cannot reproduce proper video image,
select a specific component video signal format from
among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i,
and 1080p.
Video jack or S-video jack
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the
system manually.
Video Input
1
AV System Menu (Video or S-video)
AV System Menu (y, Pb/Cb, Pr/Cr)
2
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select System and then
press the Point ► or the SELECT button.
3 Use the Point ▲▼ buttons to select the desired
system and then press the SELECT button.

Note:
The AV System Menu cannot be selected when
selecting RGB (Scart).
Video System Selection
Auto
y, Pb/Cb, Pr/Cr jacks
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
Auto
y, Pb/Cb, Pr/Cr SIGNAL FORMAT
45