Sirius Range Hoods SU1 - Manual (Page 10)

Filter requires washing indicator (SU
Models only): After 30 hours of
use, all the buttons will light up to
remind you that the grease filter
should be cleaned. Follow the
instructions for cleaning filters in this
booklet. Once the grease filters have
been cleaned and replaced, reset by
pressing the timer button (F). Do not
rely solely on this indicator –
generally, the grease filter should be
washed on a regular basis to avoid
grease filter fires.
The blower should be turned on for
approximately 5 minutes before
cooking in order to establish air
currents upward through the hood.
Use the low speeds for normal use
and the higher speeds for strong
odors and fumes.
The range hood should provide
many years of trouble free use
provided it is properly maintained.
In the event of a range top grease
fire, observe the following:
Switch OFF the range hood. Turn
off the cook top then smother flames
with a close fitting lid, cookie sheet
or other metal tray. If the flames do
not go out immediately:
EVACUATE AND CALL THE FIRE
DEPARTMENT. Never pick up a
flaming pan – you may be burned.
DO NOT USE WATER including wet
dishcloths or towels, as a violent
steam explosion may occur.
Functions
SU Models
Manual Touch Buttons:
A: Light ON/OFF Button
B: Blower Speed 1 (low) or OFF
C: Blower Speed 2 (medium)
D: Blower Speed 3 (high)
E: Blower Speed 4 (intensive)
F: 10 Minute Timer
(refer to figure 15)
SUE Models
Manual Push Button:
A: Light ON/OFF Button
B: Blower Speed 1 (low) or OFF
C: Blower Speed 2 (medium)
D: Blower Speed 3 (high)
E: Hood in Operation Light
(refer to figure 16)
M A I N T E N A N C E
7
Be sure the lights are cool before
cleaning the hood – they are
halogen and become extremely hot.
Figure 15
Figure 16