SIIG EFI 700 - Manual (Page 4)

4
Inserting Memory Cards
For all memory cards, insert with the gold pins forward
and facing down. Push the memory card into the slot until
you hear of feel a click then release. The memory card will
retract slightly upon release.
Removing Memory Cards
Memory cards can be removed at any time. Push in on
the memory card, when you hear or feel a click, release
pressure and pull the memory card out.
Accessing Memory Cards
When the reader/writer is successfully installed, a
Removable Disk
icon will appear in My Computer. To
access the memory card, double click the disk icon.
Removing the ExpressCard
Before ejecting the ExpressCard 11-in-1 Reader/Writer from
the ExpressCard slot, first use the Safely Remove
Hardware
utility to stop it. Not following the steps below
could lead to system crashes, data corruption or data loss.
Follow the steps below for your version of Windows.
For Windows 2000
1. Click the Unplug or Eject Hardware icon located in
the taskbar by the system clock.
2. Click Stop USB Mass StorageDevice.....