SRS Labs SRS Robot Level 1 Kit - Manual (Page 4)

Kit Contents
2-56 x 1" machine screw 4 McMaster-Carr 91772A086
small wood screw (in motor if not here) 2
4-40 nut 5 McMaster-Carr 90480A005
2-56 nut 4 McMaster-Carr 90480A003
#4 flat washer 8 McMaster-Carr 92141A005
#4 lock washer 2 McMaster-Carr 91113A005
#2 lock washer 8 McMaster-Carr 91113A003
Loose
Item Qty Vendor Part
chassis 1 Pololu
Solarbotics GM8 motor 2 Solarbotics GM8PW
wheel 2
rubber band (for wheel) 4
Tamiya ball caster (pair) 1 Pololu 0066
battery holder 1 Jameco 216215
velcro, 1/2" x 16" strap 1 McMaster-Carr 94905K33
4-conductor cable, 3' 1 Jameco 31860
10-conductor ribbon cable, 3' 1 Jameco 135538
servo cable 2 Barello.net
insulated copper wire, 7" 2 McMaster-Carr 8073K64
ARC Board Connection Kit
This optional add-on kit provides parts to terminate sensor wires and align them in housings for easy connection to
the board sockets. The default kit has wires tinned and inserted directly into the sockets.
Item Qty Vendor Part
1x3 .1" pin housing 2 Jameco 157382
1x4 .1" pin housing 3 Jameco 100802
male crimp pin 20 Jameco 145357
Vendor Information
Digi-Key http://www.digikey.com/
Jameco http://www.jameco.com/
Barello.net http://www.Barello.net/Commerce/
McMaster-Carr http://www.mcmaster.com/
Pololu http://www.pololu.com/
Solarbotics http://www.solarbotics.com/
Samtec http://www.samtec.com/
Future Electronics http://www.future-active.com/
Mark III Robot Store http://www.junun.org/MarkIII/
Make An Impression http://www.makeanimpression.net/
B.G. Micro http://www.bgmicro.com/
All Electronics http://www.allelectronics.com/
4 11-3-2005