Star Micronics TUP482-24 - Manual (Page 15)

– 11 –
d) Memory switch 2
N = 2
n1: Always 0
n2: Always 1
n3: Always 0
n4: Printing speed
e) Memory switch 3
N = 3
n1: Always 0
n2: Character table
n3: Print column
n4:
f) Memory switch B
N = B
n1: Always 0
n2: Presenter
n3: Always 0
n4: Always 1
0 50 mm/sec. (Default)
1 25 mm/sec.
0 Normal (Default)
1 Katakana
2 IBM
3 IBM
0 40 column (Default)
1 50 column
0 Disabled Paper feed 4 mm (Default)
1 Disabled Paper feed 3 mm (Default)
2 Same as Paper feed 4 mm
3 Same as Paper feed 3 mm
0 Not installed (TUP452)
1 Installed (TUP482)