Installation, 21 1 4 c – Smeg S800TL1 User Manual

Page 15

Text mode
Original mode

GB 15

INSTALLATION

Removal of transport bracket

The washing machine is fitted with a transport bracket to
avoid any possible damage during transport.
Before using the washing machine, the transport
bracket at the back MUST be removed.
1. Unscrew the two screws A and the four screws B with a

flat screwdriver or a No. 8 hex nut box spanner.

2. Remove the transport bracket.

3. Replace the four outer screws B on the machine and

tighten them.

4. Remove the two seals C from the hose holder and clip

them into the openings of the machine D.

Note: do not forget to replace and tighten the four
outer screws.

6GB10055.fm Page 15 Monday, August 2, 2004 12:33 PM