Technical manuals, Specifications engine, Chassis – Simplicity ZT4000 Series User Manual
Page 42: Transmissions, Dimensions, Belts and blades, 24 hp briggs & stratton, 26 hp briggs & stratton
40
www.simplicitymfg.com
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
Technical Manuals
Additional copies of this manual are available, as well as fully illustrated parts lists. These manuals show all of the
product’s components in exploded views (3D illustrations which show the relationship of parts and how they go together)
as well as part numbers and quantities used. Important assembly notes and and torque values are also included.
For applicable manuals currently available for your model, contact our Customer Publications Department at 262-284-8519
(Simplicity). Have the information listed in the box below available when phoning in your request. Technical manuals can
be downloaded from www.simplicitymfg.com
**Engine Power Rating Information
The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive Engineers) code J1940 (Small Engine Power
& Torque Rating Procedure) and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross
engine power may be lower and is affected by, but not limited to, ambient operating conditions and engine to engine variability. Given both the wide array
of products on which engines are placed, and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop
the rated gross power when used in a given piece of power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine to engine variability.
Specifications
ENGINE:
24 HP Briggs & Stratton
(S/N: 2013156319 & Below)
Make
Briggs & Stratton
Model 44M777-0113-E1
Horsepower
24 @ 3500 rpm
Displacement
44.18 Cu. in (724 cc)
Electrical System
12 Volt, 16 amp. Alternator, Battery: 340
CCA
Oil Capacity
2 qt. (1.89 L) w/ Filter
(S/N: 2013156320 & Above)
Make
Briggs & Stratton
Model 44M777-0133-G1
Horsepower
24 @ 3500 rpm
Displacement
44.18 Cu. in (724 cc)
Electrical System
12 Volt, 16 amp. Alternator, Battery: 340
CCA
Oil Capacity
2 qt. (1.89 L) w/ Filter
26 HP Briggs & Stratton
(S/N: 2013156319 & Below)
Make
Briggs & Stratton
Model 44P777-0124-G1
Horsepower
26 @ 3500 rpm
Displacement
44.18 Cu. in (724 cc)
Electrical System
12 Volt, 16 amp. Alternator, Battery: 340
CCA
Oil Capacity
2 qt. (1.89 L) w/ Filter
(S/N: 2013156320 & Above)
Make
Briggs & Stratton
Model 44P777-0135-G1
Horsepower
26 @ 3500 rpm
Displacement
44.18 Cu. in (724 cc)
Electrical System
12 Volt, 16 amp. Alternator, Battery: 340
CCA
Oil Capacity
2 qt. (1.89 L) w/ Filter
CHASSIS:
Fuel Tank
Capacity: 6 Gallons (22.7 L) Total
Rear Wheels
Tire Size: 20 x 8.00 -10
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels
Tire Size: 11 x 4.00 - 5
Inflation Pressure: 40 psi (2,76 bar)
TRANSMISSIONS:
HydroGear PG-3H / HGM-12E 3131
Type
Pump and Wheel Motor
Hydraulic Fluid
SAE 20W-50 motor oil
Speeds
Forward: 0-8 MPH (0-12.88 km/h)
@ 3400 rpm
Reverse: 0-4 MPH (0-6.44 km/h)
Continuous Torque
222 ft. lbs. (301 Nm)
Output
Maximum Weight
750 lbs. (340 Kg)
on Axle
DIMENSIONS:
Overall Length
79” (201 cm)
Overall Width
61” (155 cm)
Height
65” (165 cm)
Weight (apx..)
945 lbs. (429 kg)
BELTS AND BLADES:
Pump Drive Belt 5100923
44” Deck
Deck Drive Belt 5023496
Mower Blade 5061827
48” Deck
Deck Drive Belt 5023297
Mower Blade 5020843