Southwestern Bell 26963 - Manual (Page 7)

7
I
NSTALLATION
D
ESKTOP
I
NSTALLATION
1. Make sure mounting bracket is securely fastened.
2. Set RINGER switch (on the handset) to ON.
3. Plug the power supply cord into the POWER 9V DC jack on the base and
into an AC outlet.
4. Place handset in the base to charge for 12 hours. The CHARGE light (on
the base) comes on to indicate that the battery is charging. If you don’t
charge the handset battery properly (for 12 hours) when you
first set up the phone, performance of the battery will be
compromised.
5. Plug the telephone line cord into the TEL LINE jack on the base and into
a modular jack.
6. Raise the base antenna.
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see “Tone/Pulse Dialing”. If you don’t know which type
of service you have, check with the phone company.
CAUTION: Use only the Thomson 5-4081 power supply that is compatible
with this unit. Using other power supplies may damage the unit.
5
3
6
2
1
4