Shure FP33 User Manual
Page 3
ENGLISH
ENGLISH
1
GENERAL
The Shure FP33 is a three-input, two-output portable ste-
reo mixer designed for professional electronic news gather-
ing (ENG), electronic field production (EFP), and on-loca-
tion film production. The FP33 mixer sets a new standard
for portable mixer performance and features. An exception-
ally low-noise design makes the FP33 ideal for use with dig-
ital transmission links or digital video and audio recording
media, including DAT. Lightweight, compact, and rugged,
the FP33 is designed to withstand the most demanding field
production conditions.
All types of dynamic and condenser microphones may
be used with the FP33. The mixer provides 48 V phantom,
12 V phantom, and 12 V T (A-B) power for operating con-
denser microphones. It will operate for at least 8 hours on
two 9 V alkaline batteries. An external 12–30 Vdc power
source, such as a Shure PS20 or PS20E ac adapter, may
also be used.
Features
•
Exceptionally quiet design, suitable for use with DAT
and other digital formats
•
Extended frequency response of 20 Hz–20 kHz
•
Dynamic range greater than 100 dB
•
Transformer balanced inputs and outputs for superior
rejection of RFI and electromagnetic hum
•
Three selectable mic/line inputs
•
Two selectable mic/line outputs
•
Wide range input gain controls handle hot signal levels
without attenuators
•
48 V phantom, 12 V phantom, and 12 V T (A-B) micro-
phone power
•
Pop-up pan pots
•
Link switch gangs inputs 2 and 3 to control a stereo mi-
crophone
•
Switchable low-cut filters on each input
•
Bi-color LED signal presence and peak indicator for
each input
•
Professional VU meters with selectable timed or
toggled backlighting
•
Dual clutched Master gain control for simultaneous or
separate adjustment of output levels
•
Precision, conductive plastic, sealed rotary input po-
tentiometers
•
Bi-color LED limiter and peak indicator for each output
•
Two linkable output peak limiters with adjustable
thresholds and release times
•
Slate microphone and slate tone with selectable func-
tions
•
Isolated two-way talk-back using Monitor In and modi-
fied Slate Mic/Tape Out jack
•
High tolerance 3.5 mm jacks for stereo Tape Out and
Monitor In
•
1 kHz tone oscillator
•
Mix bus jack and cable to link FP33 or FP32A mixers
•
Headphone monitor mode switch to select L, L+R
(Mono), R, or Stereo
•
Internal headphone level adjustments to balance post–
master audio levels and Monitor In levels at the head-
phone output
•
Selectable M/S decoding circuit for headphone monitor.
•
Mixer/Monitor In switch (locking and momentary)
•
Internal Monitor defeat switch for split-feed headphone
operation
•
Headphone volume control
•
1/4 in. and 3.5 mm jacks for stereo headphone outputs.
•
Customized operation via internal DIP switches, trim
pots, slide switches, and optional jumpers
•
Regulated voltage rails (
±
15 Vdc) provide exceptional
headroom
•
Bi-color power On/Off LED
•
Battery check switch and low battery warning LED
•
Non-polarized external power jack
•
External power operating range of 12 to 30 Vdc
•
Soft-touch, color coded control knobs with raised posi-
tion indicators
•
Metal XLR input and output connectors
•
Rugged, plated metal chassis
•
Operates for 8 hours on two 9 V alkaline batteries
•
Includes carrying case, shoulder strap, and mix bus cable
•
Designed and manufactured in U.S.A.