Sunbeam ALLERGYSMART 2540 - Manual (Page 6)

ADJUSTING THE SENSITIVITY SETTING OF TUE SENSOR
You can adjust the operation of the air cleaner by changing the sensitivity
setting of the sensor (average, extra, super). The higher the sensitivity
setting, the fewer the particles counted before the air cleaner comes on.
The chart below shows the particle counts that activate the air cleaner
at the various settings*.
S u p e r Extra Average
1 5 60 160
*Particle counts indicated are mean averages. Slight variations exist from unit to unit. Sensitivity levels will vary among
individuals based upon factors such as level and type of individual allergic reactions and personal concerns.
TO RUN YOUR AIR (LEANER AUTOMATICALLY USING TUE SENSOR....
Your air cleaner will run automatically, turning
on and off, depending on the level of allergen-
sized particles in the air sampled and the
sensitivity setting you have selected. The
automatic mode is activated by selecting a
position on the sensitivity dial setting
(average, extra, super) other than OFF/manual.
Once one of these sensitivity settings is
selected, select your preferred fan speed
(sleep, low, medium, or high).
The sensor is now activated.
You will see a blinking green light, indicating
that the sensor is testing. c h e c k setting Quality