Speco Technologies PVS-CAMC - Manual (Page 4)

3 PVS-CAMC
SPECIFICATIONS
SPECIFICATIONS
ITEM PVS-CAMC
Image Sensor Varifocal Lens (3.5mm ~ 8mm)
Effective Pixels 512H ×492V (250K pixels)
Scanning System 525 Lines 2:1 Interlace
Scanning
Frequency 15.734KHz(H), 59.94Hz(V)
Resolution 380TV – Lines
Shutter Speed 1/60 ~ 1/100,000 sec
S/N Ratio More than 50dB (AGC off)
Sync. System Internal
Min. Illumination 1.0LUX (F1.2)
White Balance AWB
Video Output VBS 1.0 Vp-p (75 ohm load)
Lens C/CS MOUNT
Power Supply DC 9V ~ 14V
Power
Consumption 120mA (DC12V)
Operating Temp. -10℃ ~ +50℃
Operating Humidity 90% RH max.
Weight Approx.
250g
Accessory 60ft cable , stand , wrench
Option : PIR sensor
Always use discretion when installing video and or audio surveillance
equipment especially when there is perceived privacy or an expectation of
privacy. Inquire regarding federal, state and or local regulations applicable
to the lawful installation of video and or audio recording or surveillance.
Party consent may be required.
PVS-CAMC 4
y ESC ON/OFF
y BLC ON/OFF
y SPEAKER IN/OUT
y AUDIO
y SENSOR (TRIGGER,G,B+) FOR PIR
50mm
ESC BLC
ON ON SPEAKER
SENSOR
TRIGGER G B+
OUT IN
ESC BLC
OFF OFF
50mm POWER
MONITOR
SPEAKER
+ GND
DIN JACK CONFIGURATION
⑥ ⑤
④ ③
② ①
① DC 12V OUTPUT ② N.C
③ VIDEO INPUT ④ PIR INPUT
⑤ AUDIO INPUT ⑥ AUDIO OUTPUT
SENSOR CABLE CONFIGURATION
(RED: DC 12V)
(BLACK : GND)
(WHITE : TRIGGER)