Simplicity ZT2148T - Manual (Page 25)

21 00
Troubleshooting, Adjustment & Service
SEAT ADJUSTMENT
See Figure 16. The seat can be adjusted forward and
back. Move the lever forward, position the seat as
desired, and release the lever to lock the seat into posi-
tion.
GROUND SPEED CONTROL LEVER
ADJUSTMENT
The control levers can be adjusted in three ways. The
alignment of the control levers, the placement of the
levers (how close the ends are to one another) and the
height of the levers can be adjusted.
To Adjust the Handle Alignment
Loosen the mount bolts (A, Figure 17) and pivot the
lever(s) (C, Figure 17) to align with each other.
To Adjust the Handle Placement
Loosen the jam nuts and adjust the placement bolt (B,
Figure 17) in or out to properly adjust the lever end
spacing.
To Adjust the Handle Height
Remove the mounting hardware and reposition the han-
dle either up or down from its original position. You will
need to readjust the handle alignment as described
above.
SPEED BALANCING ADJUSTMENT
If the rider veers to the right or left when the ground
speed control levers are in the maximum forward posi-
tion, the top speed of each of these levers can be bal-
anced by turning the adjustment bolt(s) (A, Figure 18).
Only adjust the speed of the wheel that is traveling
faster.
To Reduce the Speed of the Faster Wheel
1. Loosen the securing nut.
2. turn the top speed adjustment bolt COUNTER-
CLOCKWISE to reduce the speed.
3. Retighten the securing nut when adjustment is com-
plete.
Seat Adjustment
Lever
Figure 16. Seat Adjustment
Figure 17. Control Lever Adjustment
A. Alignment Hardware
B. Placement Hardware
C. Ground Speed Control Lever
Figure 18. Top Speed Adjustment
A. Top Speed Adjustment Bolt
B. Control Lever Base
WARNING
DO NOT adjust the tractor for a faster overall
speed forward or reverse than it was designed for.
B
C
A
A
B