Sunbeam SH3700 - Manual (Page 7)

5
Using your Washable Shaver Care and Cleaning
Cleaning with water
• Ensure that the unit is unplugged before
cleaning.
• Press the two shaver head release
buttons and pull the shaver from the
casing Fig 1.
• Rinse the cutter blocks under running
water Fig 2.
• Rinse the foil under running water
Fig 3.
• To improve cleaning it is recommended
to use a little liquid soap.
• After cleaning switch the shaver off
• To protect the shaving foil, always
replace the protective cap.
Cleaning without water
• The shaver can also be cleaned without
water.
• Press the two shaver head release
buttons and pull the shaver from the
casing
• Tap the shaver head on a flat surface or
blow out the hairs thoroughly.
• Never use the brush for cleaning the
foil as this may damage it. Clean the
cutter blocks with the enclosed cleaning
brush.
Figure 2
Figure 1
Figure 3