Sharp CD-MPS900 - Manual (Page 30)

30
CD-MPS99
CD-MPS900
T
a
pe Re
cor
din
g
Recording on a cassette tape (continued)
! Recording from a CD or MP3 disc
You can record the desired disc using the DIRECT PLAY button.
To stop recording:
Press the button.
The disc and tape will stop.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the DIRECT PLAY button to start
recording.
" Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
" Playback of the disc will start approximately 7 seconds after
the tape starts.