Shindaiwa X7502825800 - Manual (Page 5)

5
Product Description
Using the illustration as a guide,
familiarize yourself with your
machine and its various components.
Understanding your machine helps
ensure top performance, long service
life and safer operation.
Edger blade
Grip
Gearcase
Cutting
attachment shield
Handle
Throttle
Trigger
Ignition switch
Fuel tank
WARNING!
Do not make unauthorized
modifications or alterations to any
of these units or their components.
Specifications
Engine Model LE254
Dry weight (Including attachments) 6.3 kg / 14.0 lb.
Engine type 4-cycle, vertical cylinder, air cooled
Bore x stroke 34 x 27 mm / 1.3 x 1.1 in.
Displacement 24.5 cc / 1.5 cu. in.
Fuel/oil ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil
Carburetor type Diaphragm-type
Fuel tank capacity 590 ml / 20.0 oz.
Ignition One-piece electronic, program contolled
Spark plug NGK CMR5H
Electrode Gap 0.6 mm / 0.024 in.
Torque 16.7 - 18.6 N∙m (148-165 in • lbf)
Air cleaner type Foam pre-filter; sealed felt main filter
Starting method Recoil
Stopping method Slide switch
Transmission type Automatic, centrifugal clutch w/bevel gear
Edger Blade 7.75 inch/197 mm Steel Edger Blade
Idle Speed (RPM) 3,000 RPM
Clutch Engagement Speed (RPM) 4,100 RPM
Wide Open Throttle (RPM) 10,500 RPM
Specifications are subject to change without notice.
Throttle Interlock
lever
Shaft tube
IMPORTANT!
This spark ignition system complies with the Canadian standard ICES-002.