Using your light & easy™ steam mop, Care of your light & easy™ steam mop – Shark LIGHT & EASY S3250W 11 User Manual
Page 8
8
TOLL FREE:
1-800-798-7398
9
www.sharkclean.com
English
Using Your Light & Easy™ Steam Mop
1
Clean under furniture and tight
areas using the
Shark
®
Backsaver™
locking handle. Press the handle
release button and apply slight
pressure to bend the handle. The
Shark
®
Backsaver™ joint will lock at
a perfect, access-maximizing angle.
(
fig. 1)
2
Press the release button on the
handle again to straighten.
fig. 1
4
To store the cooled
Shark
®
Light &
Easy™ Steam Mop, hang on a large
hook. (
fig. 3)
NOTE: If you want to store the
Light & Easy™ Steam Mop standing
upright, make sure it is leaning
against a wall for added support and
safety. Always store your
Shark
®
Light & Easy™ Steam Mop with the
micro-fiber cleaning pad removed.
Store away from children and high
traffic areas.
Care of Your Light & Easy™ Steam Mop
AFTER USE AND STORAGE
1
When you have finished using the
Light & Easy™ Steam Mop, unplug
the cord from the outlet and place
the mop into the upright position
(
fig. 1) and let the unit cool 2-3
minutes. Release steam by pumping
the handle several times.
2
Carefully separate micro-fiber
cleaning pad from steam mop,
avoiding contact with the hot pocket
or dirt. (
fig. 2)
3
Empty the water tank before storage.
Remove the water tank cap and
empty the tank over a sink. Replace
the water cap.
fig. 1
fig.2
fig.3
S3250W_11_IB_ENG_100505.indd 8-9
10-05-05 4:14 PM