Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72230106 - Manual (Page 2)

Technical Information
Model Door maximum
width Door maximum
height
72230106 56-5/8 ″ (143.8 cm) 70-1/2 ″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
Note: Right and left end walls are the same, only mirrored.
1"
(2.5 cm)
Backer board locations
3"
(7.6 cm)
Back Wall
3-1/2" (8.9 cm)
18" (45.7 cm) Grab Bar
42" (106.7 cm) Grab Bar
1-3/8" (3.5 cm)
at Midpoint
35-1/4"
(89.5 cm)
1-1/4"
(3.2 cm)
72-1/2"
(184.2 cm) 77"
(195.6 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
60"
(152.4 cm) 46"
(116.8 cm)
42"
(106.7 cm)
Grab Bar
2" (5.1 cm)
3"
(7.6 cm)
1"
(2.5 cm)
22" (55.9 cm)
End Wall
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
35-1/4"
(89.5 cm)
26"
(66 cm)
4" (10.2 cm)
8"
(20.3 cm)
10" (25.4 cm)
16"
(40.6 cm) 14"
(35.6 cm) 16"
(40.6 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) D.
Drain Hole
30" (76.2 cm)
14"
(35.6 cm)
Product Diagram
ENSEMBLE
TM
ENSEMBLE
TM
60
″ (152.4 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page 2 of 2
1064361-4-
D