Symphonic SC724DF - Manual (Page 15)

EN
V
IDEO CASSETTE
This unit will operate with any cassette that has the
mark. For best results, we recommend the
use of high-quality tapes. Do not use poor quality or
damaged tapes.
SELECTING TAPE SPEEDS
Before recording, select the tape speed from : SP
mode (Standard Play) or SLP mode (Super Long
Play). You can also play a tape recorded in LP mode
(Long Play).
ERASE PREVENTION
Break off the tab on the
back edge of the cassette
to prevent accidental eras-
ing of recording.
Cover the hole with plastic
tape to record on the tape
again.
NOTES:
• In the TV/VCR mode, if the cassette without tab is insert-
ed, playback will start automatically.
• If you press [REC/OTR] or [REC] when a cassette with-
out tab is inserted, the unit will eject it automatically.
Tab
Plastic Tape
P
LAYBACK
ON-SCREEN DISPLA
Y /
VIDEO CASSETTE / PLA
YB
A
C
K
TV/VCR SECTION
Tape Speed Recording/Playback time
T120 T160 T60 Type of tape
2 hours 2-2/3 hours 1 hour SP mode
6 hours 8 hours 3 hours SLP mode
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically when
you start playback (Digital tracking function).
• If noise lines (black and white streaks) appear on
the playback picture, use [CH. K K / L L ] until the
streaks disappear (Manual tracking adjustment).
This is available in Pause/Still/Slow mode, too.
• To release manual tracking mode, stop the tape
once and start playback again.
STILL PICTURE
• During playback, press [PAUSE F] to freeze the
picture.
You can advance the picture frame by frame by
pressing [PAUSE F] repeatedly.
• To release the Still mode, press [PLAY B B ].
SLOW MOTION
• During playback, press [PAUSE F] then press
[FWDD].
• To release the Slow mode, press [PLAY B B ].
NOTE:
• If the unit keeps the slow mode or still mode for more
than 5 minutes, it will automatically enter the stop mode.
PLAY B
STOP
REW E
FF D
15
BASIC PLAYBACK
TV/VCR TV/VCR
EJECT A
1 Insert a pre-recorded tape so that the
unit turns on automatically (Auto
Power On).
2
Select TV/VCR mode by pressing [SELECT].
NOTE:
• If the erase-prevention tab has been removed, the
unit will change the VCR mode and starts playback
automatically.
3 To start playback,
press [PLAY B
B ].
NOTE:
• Even in the DVD mode, you can start the VCR play-
back if you press [PLAY B B ] on the front panel (of
the TV/VCR side).
4
To stop the playback,
press [STOP C
C ].
5 To rewind the tape,
press [REVE].
To forward the tape,
press [FWDD].
To stop winding, press [STOP C
C ].
6 To eject the tape from the unit,
press [STOP/EJECT C A]
on the front panel.
T2203UD_EN.QX4 06.4.11 7:19 PM Page 15