Standard Horizon HX370S - Manual (Page 31)

HX370S Page 29
5.18.5 LP (L
AMP
M
ODE
)
Function: Select the LCD/Keypad Lamp mode.
Available Values: KEY/Cnt (Continue)/OFF
Default: KEY
KEY:
Illuminates the LCD/Keypad for 5 seconds when any key is
pressed.
Cnt (Continue): Illuminates the LCD/Keypad continuously.
oFF:
Disables the LCD/Keypad illumination.
5.18.6 SnL (S
CAN
L
AMP
)
Function: Enable/Disable the Scan lamp while scanning is paused.
Available Values: ON/OFF
Default: ON
5.18.7 SCn (S
CAN
D
ISPLAY
)
Function: Select the display mode while scanning.
Available Values: nor (Normal)/SPL (Special)
Default: nor (Normal)
nor (Normal): The channel number changes when scanning.
SPL (Special): The channel number only changes when the radio receives
a transmission. This lets you see the last channel on which
someone called.
Key Continue Off
5.18.8 SCr (V
OICE
S
CRAMBLER
) [Requires optional FVP-31]
Function: Enable/Disable the Voice Scrambler.
Available Values: OFF/SC0/SC1/SC2/SC3
Default: OFF
Normal Special
Off Code “SC1” Code “SC2” Code “SC3”